Sierra 2500 2WD V8-6.0L VIN U (2004)
2. Notice:
Refer to Fastener Notice in Service Precautions.
Install the bolts (2) retaining the lower ball joint (3) to the steering knuckle.
^
Tighten the bolts to 110 Nm (81 ft. lbs.).
3. Install the lower ball joint pinch bolt (1).
^
Tighten the bolt to 230 Nm (169 ft. lbs.).
4. Install the snap ring (2) to the lower ball joint.
5. Install the bolt (8) and nut (2) retaining the bracket to the axle.
^
Tighten the retaining bolt and nut to 25 Nm (18 ft. lbs.).
6. Install the tire and wheel.
7. Lower the vehicle.
8. Perform a four wheel alignment.
