Sierra 2500 2WD V8-6.0L VIN U (2004)
Shift Boot: Service and Repair
ZF S6-650
Control Lever and/or Boot Replacement
Removal Procedure
1. Remove the control lever.
Important: Loosen DO NOT remove the shift lever assembly adjustment nut if replacing the control lever.
2. Remove the control lever boot retainer plastic retainers, if necessary.
3. Remove the control lever boot retainer, if necessary.
4. Remove the control lever boot screws, if necessary.
5. Remove the control lever boot, if necessary.
6. Remove the control lever insulator, if necessary.
Installation Procedure
