Sierra 2500 2WD V8-6.6L DSL Turbo (2007)
9. Remove the engine protection shield from the vehicle, if equipped.
10. If RWD vehicle and equipped with an automatic transmission, remove the bracket bolt for the transmission oil cooler lines to the engine.
11. Move the transmission oil cooler lines aside.
Notice: Refer to Engine Lifting Notice.
Important: When raising the engine only raise enough to separate the engine mount from the engine mount bracket. Raising any further
the fan shroud or the exhaust pipe will require removal.
12. If RWD vehicle, using a suitable jack on the ground wire bolt bosses, raise the engine.
Only raise the engine enough to separate the engine mount to engine mount bracket.
13. If 4WD vehicle, attach a chain to the front of the engine. Use accessible mounting bolts for the generator mounting bracket and the power steering
pump mounting bracket.
14. Raise the engine with a suitable lifting device to remove the engine mount.
Only raise the engine enough to separate the engine mount to engine mount bracket.
