Sierra 2500 2WD V8-6.6L DSL Turbo (2007)
![background image](/gmc/sierra_2500_2wd/v8-6.6l_dsl_turbo/Page-1464002.png)
Notice: When removing the propeller shaft, do not attempt to remove the shaft by pounding on the yoke ears or using a tool between the yoke and
the universal joint. If the propeller shaft is removed by using such means, the injection joints may fracture and lead to premature failure of the
joint.
4. Remove the bolts (6) and the yoke retainers (7) from the front axle pinion yoke (1).
Important: Do not drop the bearing cap assemblies of the yoke end.
5. Disconnect the propeller shaft (2) from the front axle pinion yoke (1).
Wrap the bearing caps with tape in order to prevent the loss of bearing rollers.
6. Use tape to secure the bearing caps.