Sierra 2500 2WD V8-6.6L DSL Turbo (2007)
Notice: Refer to Fastener Notice.
2. Install the right PCV hose/pipe bolt.
Tighten the bolt to 18 N.m (13 lb ft).
3. Install the left PCV hose/pipe bolt.
Tighten the bolt to 18 N.m (13 lb ft).
4. Install the PCV hose to the air inlet pipe.
5. Position the PCV hose clamp.
6. Install the PCV hose to the clip on the top of the turbocharger.
7. Install the air cleaner outlet duct.