Sierra 2500 2WD V8-6.6L DSL Turbo (2007)
1. Install the fuel hose (4) to the fuel injection fuel feed manifold and injection pump.
2. Position the fuel hose clamp (3) at the fuel injection pump.
3. Position the fuel hose clamp (2) at the fuel injection fuel feed manifold.
4. Install the intake manifold tube.
5. Install the water outlet.
6. Prime the fuel system. Refer to Fuel System Priming.
7. Start the engine. If the engine stalls, repeat the above step.
8. Once the engine starts, inspect for fuel leaks.
Fuel Hose/Pipes Replacement - Chassis (Cab/Chassis w/Balance Pump)
Fuel Hose/Pipes Replacement - Chassis (Cab/Chassis w/Balance Pump)
Removal Procedure
