Sierra 2500 2WD V8-6.6L DSL Turbo (2007)
7. Bend the end of the tie strap 180 degrees over the top of the buckle.
8. Cut off the tie strap using side cutters so that the cut end will lie approximately over the center of the buckle. Push down the end of the tie strap
over the buckle in order to minimize protrusion of the cut end or any sharp edges.
9. Finished installation is shown.
10. Install the intake manifold cover.
11. Perform the turbocharger learn procedure. Refer to Turbocharger Learn.
