Sierra 2500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
1. Install the fuel injection pump to the block.
2. Install the fuel injection pump bolts.
Tighten
Tighten the bolts to 21 N.m (15 lb ft).
3. Install the hoses to fuel lines.
4. Position the injection pump hose clamps at the fuel line.
5. Install the inlet pipe.
6. Connect the fuel rail inlet pipe to the injection pump and rail.
Tighten
Tighten the fittings to 41 N.m (30 lb ft).
7. Connect the fuel balance pipe fitting to the right fuel rail.
Tighten
Tighten the fitting to 41 N.m (30 lb ft).
8. Install the fuel balance pipe retainer bolts.
Tighten
Tighten the bolts to 10 N.m (89 lb in).
