Sierra 2500 2WD V8-8.1L VIN G (2005)
Parking Brake Shoe: Service and Repair
W/RPO NYS
Park Brake Shoe Replacement (w/RPO NYS)
Removal Procedure
Caution: Refer to Brake Dust Caution in Service Precautions.
1. Release the park brake.
2. Raise and support the vehicle.
3. Remove the tire and wheel assembly.
4. Relieve the tension from the park brake cable by pulling down on the intermediate cable then release the cable from the equalizer bar.
5. Remove the rear park brake bracket bolt.
6. Remove the park brake cable from the park brake actuator lever.