Sierra 2500 4WD V8-6.0L (2008)
Notice: Refer to Fastener Notice .
8. Tighten the CMP actuator solenoid valve.
1. Tighten the valve a first pass to 65 N.m (48 lb ft).
2. Tighten the valve a final pass and additional 90 degrees using J 45059 .
9. Install the oil pump. Refer to Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (LY6, L76 and L92) (See: Engine, Cooling and
Exhaust/Engine/Engine Lubrication/Oil Pump/Service and Repair)Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (LH6, LMG, LY2
and LY5) (See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Pump/Service and Repair) .
