Sierra 2500 4WD V8-6.0L (2008)
Clutch Slave Cylinder: Service and Repair
Clutch Actuator Cylinder Replacement (TZ0)
Clutch Actuator Cylinder Replacement (TZ0)
Removal Procedure
1. Remove the transmission. Refer to Transmission Replacement (See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Tremec 5-Speed (TZ0) - Manual Transmission/Transmission Replacement) .
2. Remove the clutch actuator cylinder bolts.
3. Remove the clutch actuator cylinder.
If required, the clutch release bearing can be removed from the clutch actuator cylinder for replacement.
Installation Procedure
1. Install the clutch actuator cylinder.
Notice: Refer to Fastener Notice .
2. Install the clutch actuator cylinder bolts.
Tighten the bolts to 8 N.m (71 lb in).
3. Install the transmission. Refer to Transmission Replacement (See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Tremec 5-Speed (TZ0) - Manual Transmission/Transmission Replacement) .