Sierra 2500 4WD V8-6.0L (2008)
1. Install the rear axle housing cover. Refer to Rear Axle Housing Cover and Gasket Replacement (See: Differential Cover/Service and Repair) .
2. Fill the rear axle housing.
*
Use the proper fluid. Refer to Approximate Fluid Capacities .
*
For the correct capacity, refer to Fluid and Lubricant Recommendations .
Notice: Refer to Fastener Notice .
3. Install the fill plug.
Tighten the fill plug to 33 N.m (24 lb ft).
Rear Axle Lubricant Replacement (9.5 Inch LD Axle)
Rear Axle Lubricant Replacement (9.5 Inch LD Axle)
