Sierra 2500 4WD V8-6.0L (2008)
8. Turn the wheel hub over and install the inner bearing cup.
9. Drive the inner bearing cup into the wheel hub using the J 24427 (2) and the J 8092 (1).
10. Install the inner bearing.
11. Using the J 44420 (2) and the J 8092 (1), install the new oil seal. Ensure the seal is fully seated in the hub bore.
12. Install the rotor, if necessary. Refer to Rear Brake Rotor Replacement (JD9) Rear Brake Rotor Replacement (JH6) Rear Brake Rotor
Replacement (JH7) .
13. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.