Sierra 2500 4WD V8-6.0L (2008)
1. Place the propeller shaft assembly (3) on a block of wood.
2. Position the center bearing assembly (2) on the propeller shaft (3).
3. Using the J 5590 or J 25234 (1), install the center bearing assembly (2) on the propeller shaft (3).
4. For HD vehicles, use the J 25234 (1) to install the propeller shaft boot retainer (2) on the center bearing assembly (3).
5. Install the propeller shaft assembly. Refer to Two-Piece Propeller Shaft Replacement (See: Drive/Propeller Shaft/Service and Repair/Two-Piece
Propeller Shaft Replacement)
6. Lower the vehicle.