Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
Truck Bed Cover Latch: All Technical Service Bulletins
Accessories - Tonneau Cover Handle Separates from Latch
Bulletin No.: 07-08-66-008
Date: November 06, 2007
TECHNICAL
Subject:
GM Accessory Soft Tonneau Cover Pull Strap Handle Separates from Latch (Replace Latch Assembly)
Models:
2007-2008 Chevrolet Silverado
2007-2008 GMC Sierra, Sierra Denali
Condition
Some customers may comment that the front and/or rear tonneau cover pull strap handle separates from the tonneau cover latch. This condition typically
occurs on the rear pull strap latch.
Cause
This condition may be caused by a weak slide eyelet (1) on the pull strap latch.
Correction
Replace the front and rear pull strap latches with the new design latches following the steps below.
Open the tailgate.
Release the left rear tonneau cover latch by using a screwdriver to slide the broken eyelet on the latch to the right.
Flip the rear of the tonneau cover up.
Remove the left rear plastic rail end cover from the rear tonneau cover rail.