Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
18. Position the generator positive cable.
19. Install the generator positive cable in the clip on the engine front cover.
20. Install the generator positive cable and nut.
Tighten the nut to 9 N.m (80 lb in).
21. Install the positive battery cable junction block bracket and bolt (1) to the power steering pump.
Tighten the bolt to 9 N.m (80 lb in).
22. Remove the tape from the turbocharger openings.
23. Install the charged air cooler inlet duct.
24. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Vac-N-Fill).
25. Connect the negative battery cable.
26. Install the intake manifold cover.
