Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
5. If equipped with dual generators, install the left side idler pulley and bolt.
Tighten the bolt to 43 N.m (32 lb ft)
6. Install the auxiliary generator.
7. Install the battery cable junction block and bolt (1).
Tighten the bolt to 9 N.m (80 lb in).
8. Position the A/C compressor.
9. Install the A/C compressor bolts.
Tighten the bolts to 50 N.m (37 lb ft).
10. Connect the A/C cut out switch electrical connector.
11. Connect the A/C clutch electrical connector.
12. Install the drive belt.
13. Install the cooling fan and shroud.
14. Connect the negative battery cable.
