Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
6. Position the fuel pipe bracket (3) and install the bolt (4).
Tighten the bolt to 24 N.m (18 lb ft).
7. Install the fuel return pipe.
8. Install the right fuel rail fuel feed pipe.
9. Install the PCV hose/pipe.
10. Install the charge air cooler inlet pipe.
11. Install the fuel line bracket to the stud.
12. Install the fuel line bracket nut.
Tighten the nut to 16 N.m (12 lb ft).
13. Prime the fuel system. Refer to Fuel System Priming.
14. Start the engine. If the engine stalls, repeat the above step.
15. Once the engine starts, inspect for fuel leaks.
