Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
2. Connect the fuel injection fuel feed pipe (3) to the fuel return pipe.
Notice: Refer to Fastener Notice.
3. Position and install the fuel return pipe clamp and bolt (2).
Tighten the bolt to 24 N.m (18 lb ft).
4. Install the fuel return hose to the return pipe.
5. Position the fuel return hose clamp (1) at the return pipe.
6. Install the fuel return pipe bracket, clamp, and bolt (1).
Tighten the bolt to 24 N.m (18 lb ft).
7. Install the fuel return pipe clip and bolt (2).
