Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
Notice: Refer to Fastener Notice.
2. Install the fuel rail fuel feed pipe upper clamps and bolts (2 and 3).
Tighten the bolts to 24 N.m (18 lb ft).
3. Tighten the fuel rail fuel feed pipe fitting (4) at the right fuel rail.
Tighten the fitting to 41 N.m (30 lb ft).
4. Tighten the fuel rail fuel feed pipe fitting (1) at the left fuel rail.
Tighten the fitting to 41 N.m (30 lb ft).
5. Install the EGR valve cooler.
6. Install the fuel feed pipe.
7. Prime the fuel system. Refer to Fuel System Priming.
8. Start the engine. If the engine stalls, repeat the above step.
9. Once the engine starts, inspect for fuel leaks.