Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
3. Connect the engine wiring harness electrical connector to the turbocharger vane control solenoid valve.
4. Position the turbocharger oil feed pipe to the turbocharger.
5. Install a NEW turbocharger oil feed pipe washer and the banjo bolt.
Tighten the bolt to 34 N.m (25 lb ft).
6. Install the EGR valve cooler.
7. Perform the turbocharger learn procedure. Refer to Turbocharger Learn. See: Service and Repair/Procedures