Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
3. Completely wrap the shield/tape around the sensor.
4. Tuck the top of the shield/tape under the head of the brass cable crimp sleeve all around, allowing the shield/tape to fold over and overlap itself at
the top.
5. The top of the shield/tape is now shown tucked under the head of the brass cable crimp sleeve all around.
6. Wrap the tie strap around the necked porting of the sensor body just above the hex. Insert the end of the strap in the buckle and tighten by pulling
the end with needlenose pliers.
