Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
4. Install the fuel feed pipe bracket bolts (1).
Tighten the bolts to 24 N.m (18 lb ft).
5. Position the heater inlet hose/pipe to the engine.
6. Install the heater inlet hose bracket to the generator bracket stud (2) and install the bracket nut (3).
Tighten the nut to 9 N.m (80 lb in).
7. Install the heater inlet hose to the fuel filter adapter stud (1) and install the bracket nut (4).
Tighten the nut to 9 N.m (80 lb in).