Sierra 2500 4WD V8-6.6L DSL Turbo (2007)
6. Install the lower ball joint in the steering knuckle.
7. Install the wheel drive shaft.
8. Install the lower ball joint retaining nut.
Tighten nuts to 110 N.m (81 lb ft).
9. Install the shock module.
10. Remove the support for the knuckle and upper control arm.
11. Install the stabilizer shaft links to the lower control arm.
12. Install the tire and wheel.
13. Remove the supports and lower the vehicle.
14. Align the front end. Refer to Wheel Alignment Measurement.