Sierra 2500 4WD V8-8.1L VIN G (2006)
8. Remove the rear axle shaft.
9. Remove the park brake shoe return spring (6).
10. Remove the park brake shoe anchor springs and pins.
11. Separate the tips of the shoes from the park brake actuator and remove the park brake shoes and adjuster assembly from the vehicle.
Installation Procedure
1. Clean the debris and the dust from the park brake components using a clean shop cloth.
2. Install the adjuster assembly to the park brake shoes.
3. Separate the tips of the shoes and install the park brake shoes to the park brake actuator.
4. Install the park brake shoe anchor springs and pins.
