Sierra 2500 4WD V8-8.1L VIN G (2006)
8. Install the oil level sensor to the oil pan.
^
Tighten the sensor to 20 Nm (15 ft. lbs.).
9. Install the engine harness clip to the oil pan.
10. Connect the oil level sensor electrical connector (4).
11. Install the oil level indicator.
12. Fill the engine with oil.
13. If equipped with 4WD, install the crossbar.
14. Install the crossbar bolts.
^
Tighten the bolts to 100 Nm (74 ft. lbs.).
