Sierra 2500 Denali 2WD V8-6.0L (2011)
5. Install the brake hose bracket bolt (1) and tighten to 25 Nm (18 lb ft).
6. Connect the right front rear brake pipe fitting (1) and tighten to 25 Nm (18 lb ft).
7. Connect the left front rear brake pipe fitting (1) and tighten to 25 Nm (18 lb ft).
8. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair)Hydraulic Brake System Bleeding (Two-mode Hybrid) (See: Brake
Bleeding/Service and Repair).
Rear Brake Hose Replacement (To Caliper - JD9)
Rear Brake Hose Replacement (To Caliper - JD9)
