Sierra 2500 Denali 2WD V8-6.0L (2011)
3. Drill a 3 mm (1/8 in) hole through the dimple in the right parking brake cable connector (1) where the front parking brake cable is connected.
4. Pull the parking brake equalizer forward and disconnect the right rear parking brake cable connector from the front parking brake cable.
5. Drill a 3 mm (1/8 in) hole through the dimple in the intermediate parking brake cable connector where the front parking brake cable (1) is
connected.
6. Disconnect the front parking brake cable from the intermediate parking brake cable.
7. Remove the intermediate parking brake cable.
Installation Procedure
1. Position the intermediate parking brake cable to the vehicle.
