Sierra 2500 Denali 2WD V8-6.0L (2011)
Alignment: Service and Repair
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
1. Loosen the jam nut on the inner tie rod (1).
2. Rotate the inner tie rod (2) to the required toe specification setting. Refer to Wheel Alignment Specifications (1500) (See: Specifications)Wheel
Alignment Specifications (2500 and 3500) (See: Specifications).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the jam nut (1) on the tie rod and tighten to 75 Nm (55 lb ft).
4. Check the toe setting after tightening.
5. Re-adjust the toe setting if necessary.
