gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Procedures|Page 10042 > < Procedures|Page 10040
Page 17
background image

73. Disconnect the deployment harness from the power source and twist the wire ends together.
74. Continue the same process with the remaining deployment harnesses.
75. Remove the drop cloth from the vehicle.
76. Disconnect all harnesses from the vehicle.
77. Discard the harnesses.
78. Scrap the vehicle in the same manner as a non-SIR equipped vehicle.
79. If one or all of the inflator modules did not deploy, perform the following steps to remove the undeployed modules from the vehicle:

*

Steering Wheel Inflatable Restraint Module Replacement   (See: Removal and Replacement/Steering Wheel Inflatable Restraint Module
Replacement)

*

Instrument Panel Inflatable Restraint Module Replacement   (See: Removal and Replacement/Instrument Panel Inflatable Restraint Module
Replacement)

*

Roof Side Rail Inflatable Restraint Module Replacement (Crew Cab)   (See: Removal and Replacement/Roof Side Rail Inflatable Restraint
Module Replacement (Crew Cab))Roof Side Rail Inflatable Restraint Module Replacement (Extended Cab)   (See: Removal and
Replacement/Roof Side Rail Inflatable Restraint Module Replacement (Extended Cab))Roof Side Rail Inflatable Restraint Module
Replacement (Regular Cab)   (See: Removal and Replacement/Roof Side Rail Inflatable Restraint Module Replacement (Regular Cab))

Procedures|Page 10042 > < Procedures|Page 10040