Sierra 2500 Denali 2WD V8-6.0L (2011)
Positive: Service and Repair
Battery Positive Cable Replacement
Battery Positive Cable Replacement (Gas)
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) (See: Negative/Service
and Repair)Battery Negative Cable Disconnection and Connection (TP2) (See: Negative/Service and Repair).
2. Remove the underhood fuse block cover (1).
3. Lift the fuse block retainers (2) from the locked position and rotate the retainers to the open position.
4. Reposition the fuse block and remove the battery positive connector (3) from the underhood fuse block base.
5. Remove the battery positive cable retainers (1) from the studs on the plenum front panel.
