Sierra 2500 Denali 2WD V8-6.0L (2011)
2. Install the battery positive cable retainers (1) to the upper plenum.Install the battery positive cable clip nuts (1) to the studs on the upper plenum.
3. Install the battery positive cable connector (3) to the underhood fuse block.
4. Ensure that the underhood fuse block retainers (2) are in the open position.
5. Position and engage the junction block to the 4 bracket pivots, push the retainers (2) down into the locked position.
6. Install the underhood fuse block cover.
7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) (See: Negative/Service and
Repair)Battery Negative Cable Disconnection and Connection (TP2) (See: Negative/Service and Repair).
