Sierra 2500 Denali 2WD V8-6.0L (2011)
7. Working through the wheel opening, remove the positive battery cable clip (2) from the brake pipe.
8. Working through the wheel opening, remove the positive battery cable clip (3) from the air cleaner adapter bracket
9. Lower the vehicle.
10. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Service and Repair).
11. Remove the positive battery cable clip (4) from the air cleaner support bracket.
12. Remove the positive battery cable clip (5) from the fender inner panel.
13. Disconnect the positive battery cable electrical connector (1) from the drive motor generator control module.
14. Remove the positive battery cable (1) from the vehicle.
Installation Procedure
