Sierra 2500 Denali 2WD V8-6.0L (2011)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the solenoid bolts (1).
Tighten the bolts to 10 Nm (89 lb in).
5. Wipe the excess silicone pressed out during the solenoid installation from around the base of the solenoid to make a weather proof seal.
6. Install the cable to the M-terminal stud between the washers and terminal nut.
7. Tighten the M-terminal stud nut.
Tighten the nut to 8 Nm (71 lb in).
