Sierra 2500 Denali 2WD V8-6.0L (2011)
1. Install the shock absorber.
2. Install the upper shock absorber nut and bolt.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the lower shock absorber nut and bolt.
*
Tighten the upper shock absorber bolts to 115 Nm (85 lb ft).
*
Tighten the lower shock absorber bolts to 115 Nm (85 lb ft).
4. Remove the support from the rear axle.
5. Remove the safety stands.
6. Lower the vehicle.
Shock Absorber Replacement (2500, 3500)
Shock Absorber Replacement (2500, 3500)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
2. Support the rear axle assembly with the proper jack stand.
