Sierra 2500 Denali 2WD V8-6.0L (2011)
17. Install the clips on the cable to the floor panel reinforcement.
18. Lower the vehicle.
19. Test the transmission for proper shift operation.
20. If all of the gear positions cannot be achieved, adjust the cable. Refer to Range Selector Lever Cable Adjustment (See: Adjustments/2ML70 -
Automatic Transmission).
Range Selector Lever Cable Bracket Replacement
Range Selector Lever Cable Bracket Replacement
Removal Procedure
1. Apply the park brake.
2. Shift the transmission into neutral.
3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
4. Remove the retainer that secures the cable to the bracket.
5. Depress the tangs and remove the cable from the bracket.
6. Remove the bolts (1) securing the transmission range selector cable bracket (2) to the transmission.
7. Remove the transmission range selector cable bracket.
Installation Procedure
