Sierra 2500 Denali 2WD V8-6.0L (2011)
9. Install NEW fluid pump seals (6).
10. Install a NEW control valve upper body seal assembly (1).
11. Install the control valve upper body (2).
Caution: Bolt torque sequencing is critical to the proper function of the control solenoid valve assembly. Failure to follow the required
sequencing may result in transmission malfunction.
12. Install the control valve upper body bolts (3).
Tighten the bolts to 11 Nm (97 lb in).
13. Install the manual shift detent spring (5).
14. Install the manual shift detent spring bolt (4).
15. Install the control solenoid valve and transmission control module assembly. Refer to Control Solenoid Valve and Transmission Control Module
Assembly Replacement (See: Extension Housing/Service and Repair/2ML70 - Automatic Transmission/Control Solenoid Valve and
Transmission Control Module Assembly Replacement).