Sierra 2500 Denali 2WD V8-6.0L (2011)
19. Reinstall the original fill plug, hand start it and apply a static torque of 35 Nm (26 lb ft) with a pre-set clicker wrench.
20. Clean the axle surface from oil residuals using a multipurpose solvent and clean towel. Spray black paint over the bolt heads and fill plug.
21. FOR SUV ONLY: Unhook the track bar from the frame making sure to remove the hook from the vehicle. By applying a lateral push on the
wheel, align the track bar hole to the axle. Hand start the track bar bolt and apply a static torque of 105 Nm (77 lb ft) with a pre-set clicker wrench.