Sierra 2500 Denali 2WD V8-6.0L (2011)
Drive/Propeller Shaft: Service and Repair
Front Propeller Shaft Replacement
Front Propeller Shaft Replacement
Special Tools
J 43218 Clamp Pliers - Narrow Jaw
Removal Procedure
Note: Before disassembly, observe and accurately reference mark all driveline components relative to the propeller shaft and axles. These items include
the following components:
*
The propeller shafts
*
The wheel drive shafts
*
The pinion flanges
*
The output shafts
Assemble all components in the exact relationship to each other as they were prior to removal. Observe all published specifications and torque values,
and any measurements obtained prior to disassembly.
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the clamp (4) at the transfer case by prying up the exposed end of the clamp with a flat-bladed tool.
3. Reference mark the relationship of the propeller shaft to the front axle pinon yoke.
