Sierra 2500 Denali 2WD V8-6.0L (2011)
joint.
5. Remove the rear propeller shaft from the rear axle and the center support bearing.
Note: Step 6 is for those vehicles that have a slip yoke from the transmission from transfer case to the propeller shaft.
6. Reference mark the transmission or the transfer case (1), propeller shaft slip yoke (2), universal bearing cap (3), and the propeller shaft (4).
Note: Step 7 is for those vehicles that have the yoke attached to the output shaft.
7. Reference mark the transmission or transfer case (1), output shaft flange (2), universal joint bearing cap (3), and the propeller shaft.