Sierra 2500 Denali 2WD V8-6.0L (2011)
1. Install a NEW shift lever insulator.
2. Install the shift lever seal and lever.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the shift lever bolts.
Tighten the bolts to 20 Nm (15 lb ft).
4. Install the boot.
5. Install the control lever and boot. Refer to Transmission Control Lever Boot Replacement (See: Tremec 5-Speed (MQ7) - Manual
Transmission/Transmission Control Lever Boot Replacement).