Sierra 3500 2WD V8-6.0L (2008)
13. Remove the adjustable pedal bracket bolt (1).
14. Position the brake booster forward until the studs are past the adjustable pedal bracket holes.
15. Remove the adjustable pedal assembly from the vehicle.
Installation Procedure
1. With the aid of an assistant, position the brake booster to the vehicle.
2. Install the adjustable pedal assembly to the vehicle.
Important: Do not tighten the adjustable pedal bracket bolt until the adjustable pedal bracket nuts are installed.
3. Hand install the adjustable pedal bracket bolt (1).
Notice: Refer to Fastener Notice.