Sierra 3500 2WD V8-6.0L (2008)
6. Install the radiator vent inlet hose (2) to the coolant air bleed pipe fitting.
7. Position the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting.
8. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
9. Fill the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) (See: Service and Repair)Cooling System Draining and Filling
(Static Fill) (See: Service and Repair) .
10. If the rear coolant air bleed covers were replaced, install the intake manifold. Refer to Intake Manifold Replacement (L92 - First Design) (See:
Engine/Intake Manifold/Service and Repair)Intake Manifold Replacement (L92 - Second Design) (See: Engine/Intake Manifold/Service and
Repair)Intake Manifold Replacement (LY2 and LY6) (See: Engine/Intake Manifold/Service and Repair)Intake Manifold Replacement (LH6,
LMG, LY5 and L76) (See: Engine/Intake Manifold/Service and Repair) .
