Sierra 3500 2WD V8-6.0L (2008)
Idler Arm: Service and Repair
Idler Arm Replacement
Tools Required
J 24319-B Steering Linkage and Tie Rod Puller
Removal Procedure
Notice: Do not attempt to free the ball stud by using a pickle fork or wedge type tool, because seal or bushing damage could result. Use the proper tool
to separate all ball joints.
1. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
Important: Discard the idler arm nut.
2. Remove the idler arm nut (3) from the idler arm (1).
3. Separate the idler arm (1) from the relay rod (2).
4. Remove the idler arm from the relay rod using puller J 24319-B .