Sierra 3500 2WD V8-6.0L (2008)
Removal Procedure
Important: Use only hand tools to perform the following service procedure.
Important: The following service procedure is to be performed after the strut assembly has been removed from the vehicle and installed in the
appropriate tool.
1. Install the shock absorber assembly in the J 45400 .
Important: Ensure that the fingers for the spring compressor are properly adjusted on the top of the front suspension mount.
2. Position the shock absorber assembly (3) in the J 45400 (2) so that the fingers are properly seated on the top of the front suspension strut mount
(1).
