Sierra 3500 2WD V8-6.0L (2008)
Shifter A/T: Service and Repair
Shift Lever Replacement
Shift Lever Replacement
Removal Procedure
1. Remove the steering column shroud. Refer to Steering Column Shroud Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Shroud Replacement) .
2. Roll back the shift lever seal on the shift lever until the shift lever bolt is exposed.
3. Disconnect any electrical connectors as needed.
4. Remove the shift lever bolt (2).
5. Remove the shift lever (1).
Installation Procedure