gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Pinion Gear, Differential > < Drive Pinion Flange/Yoke and/or Oil Seal Replacement (All Except 9.75 Inch Axle)|Page 15547
Page 5
background image

11. Install the propeller shaft yoke retaining clamps and the bolts.

Tighten the bolts to 25 N.m (18 lb ft).

12. Inspect and add axle lubricant to the axle housing, if necessary. Refer to Rear Axle Lubricant Level Inspection (11.5 Inch Axle)  (See: Fluid -

Differential/Service and Repair/Procedures/Rear Axle Lubricant Level Inspection (11.5 Inch Axle))Rear Axle Lubricant Level Inspection (8.6, 9.5
LD Axle)  (See: Fluid - Differential/Service and Repair/Procedures/Rear Axle Lubricant Level Inspection (8.6, 9.5 LD Axle))Rear Axle Lubricant
Level Inspection (10.5 Inch Axle)  (See: Fluid - Differential/Service and Repair/Procedures/Rear Axle Lubricant Level Inspection (10.5 Inch
Axle)) .

13. Lower the vehicle.

Pinion Gear, Differential > < Drive Pinion Flange/Yoke and/or Oil Seal Replacement (All Except 9.75 Inch Axle)|Page 15547