gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (W/O VSES)|Page 15615 > < Rear Axle Shaft Seal and/or Bearing Replacement (W/O VSES)|Page 15613

Sierra 3500 2WD V8-6.0L (2008)

Page 2
background image

7. Using the J 2222-C wrench , remove the rear wheel bearing adjuster nut.

Note:  If the oil seal remains on the axle hub, remove the seal using a suitable seal removal tool. 

8. Remove the rear axle hub from the axle housing.
9. Remove the rear brake rotor, if necessary. Refer to Rear Brake Rotor Replacement See: Brakes and Traction Control/Disc Brake System/Brake

Rotor/Disc/Service and Repair/Procedures.

10. Using a suitable seal removal tool, remove the oil seal from the wheel hub.

11. Remove the inner hub bearing.

Rear Axle Shaft Seal and/or Bearing Replacement (W/O VSES)|Page 15615 > < Rear Axle Shaft Seal and/or Bearing Replacement (W/O VSES)|Page 15613