Sierra 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
7. Install the upper oil pan to engine front cover bolts.
Tighten the bolts to 21 Nm (15 ft. lbs.).
8. Install a NEW O-ring to the CKP sensor spacer.
9. Lubricate the O-ring with clean engine oil.
Important: The crankshaft position sensor spacers are machined with different timing positions. However, if the crankshaft position sensor
spacer requires replacement, replace with a grade “C” spacer.
10. Install the CKP sensor spacer and bolts.
Tighten the bolts to 10 Nm (89 inch lbs.).
11. Install a NEW O-ring to the CKP sensor.
12. Lubricate the O-ring with clean engine oil.
13. Install the CKP sensor and bolt.
Tighten the bolt to 10 Nm (89 inch lbs.).