Sierra 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
3. Install the fuel injector pipes.
Tighten
Tighten the fittings to 41 N.m (30 lb ft).
4. Install the fuel rail balance pipe.
5. Connect the fuel rail balance pipe to the fuel rails.
Tighten
Tighten the fittings to 41 N.m (30 lb ft).
6. Install the fuel rail balance pipe bolts.
Tighten
Tighten the bolts 25 N.m (18 lb ft).
7. Install the PCV hose/pipe.
8. Install the EGR cooler tube.
9. Install the fuel filter.
10. Install the FICM.
11. Install the air cleaner outlet duct.
12. Connect the negative battery cables.
13. Prime the fuel system. Refer to Fuel System Priming.
14. Start the engine. If the engine stalls, repeat the above step.
15. Once the engine starts, inspect for fuel leaks.
